Fronius Verto 25.0 400 Solar Inverter 25 kW
€2,909.02
- Delivery time:
In stock, delivery time: 5-7 working days (varies for international orders)
- Item-No.: 114240
- GTIN: 9007947634801
- Manufacturer-No.: 4,210,432
- Product-Weight: 45 kg
- Shipping info: Spedition
Fronius Verto 25.0 400 Solar Inverter 25 kW
The optimized Verto 25.0 400 offers a higher power density than the already available power classes, is even more efficient, lighter and has three instead of four MPP trackers. Specially developed for use in small businesses, agriculture and apartment buildings, it offers the best possible yields even under difficult conditions with its three MPPTs, wide input voltage range and innovative shading management. The Verto offers maximum installation flexibility and can be installed either hanging or lying flat. The choice of overvoltage protection has also been simplified. The Verto 25.0 400 is supplied with a DC SPD type 1+2 and an AC SPD type 2.
Features:
- Equipped with 3 independent MPP trackers
- Optimum yields even in shaded areas thanks to the integrated Dynamic Peak Manager algorithm
- Specially developed for use on demanding roof surfaces
- Greater safety thanks to various integrated protective devices (AC/DC overvoltage protection, arc detection, etc.)
| Specifications | |
| Number of MPP trackers: | 3 |
| Usable MPP voltage range: | 150 - 870 V |
| Number of DC inputs (per MPPT): | 2 |
| AC Nominal power: | 25000 W |
| Max. Output power: | 25000 VA |
| DC/AC overvoltage protection: | Type 1+2 |
| Dimensions (H x W x D): | 730.4 x 539.6 x 278.2 mm |
| Weight: | 35.2 kg |
For further information, please refer to the data sheet
10 a.m. - 12 p.m. and
2 p.m. - 4 p.m.
- Photovoltaic experts since 2008
- Only original products from top brands
- Short response times to inquiries
- 2% discount for prepayment
- Short delivery times
- Collection of in-stock items possible
Manufacturer
Fronius International GmbH
Froniusstraße 1
4643 Pettenbach
Austria
E-Mail: contact@fronius.com
Web: www.fronius.com
Economic operator
Fronius Deutschland GmbH
Fronius Straße 1
36119 Neuhof-Dorfborn
Germany
Tel. / Fon:
+49 (0) 66 55-9 16 94-0
E-Mail: pv-sales-germany@fronius.com
Web: www.fronius.com/de
Safety Instructions:
- Installation by qualified personnel: Installation must only be carried out by qualified electricians or other qualified personnel.
- Work with the system switched off: Switch off all power sources (AC and DC) and verify that the system is de-energized before installation.
- Ensure grounding: The inverter and the entire system must be properly grounded to ensure safety.
- Ensure ventilation: Install the inverter in a well-ventilated location to prevent overheating. Observe the minimum clearances recommended by the manufacturer.
- No contact with flammable materials: The inverter must not be installed near flammable or explosive materials.
- High voltage hazard: Inverters operate at high DC and AC voltages. Do not touch any exposed wires or connectors.
- Use correct cables: Use only cables and connectors recommended or certified by the manufacturer.
- Observe polarity: Ensure the DC side is connected with correct polarity to avoid damage to the device.
- Do not work while connected: Never open or work on the inverter while it is live.
- Install surge protection: Protect the inverter and system from surges by installing surge protection devices and appropriate fuses.
- Ensure the device is de-energized: Before any maintenance or repair, all power sources must be disconnected and verified to be de-energized.
- No modifications: Unauthorized alterations, modifications, or repairs, as well as opening the product, are prohibited.
- Protect from water and moisture: Install the inverter in an environment protected from rain, condensation, and high humidity.
- Avoid dust and contamination: Keep the inverter free from dust, insects, and other contaminants.