Prices incl. VAT, plus shipping costs
- Delivery time:
- Order number: 113416
- Weight: 2.9 kg
- EAN: 4262431422745
- Manufacturer's no.: 02314BXL-003
- Collection possible: No collection possible.
in stock (2-5 working days) (abroad may vary)
Huawei FusionCharge AC 22 kW Wallbox SCharger-22KT-S0
The smart addition to your Huawei home storage system with type 2 charging socket and RFID
The Huawei Smart Charger is the ideal complement to the Huawei complete system. You can see all the energy flows and information from your system and the charger in a directly networked app. Charge with excess PV and automatic phase switching1) for even more efficiency.
Phase switching1) 2)
- automatically between 1- and 3-phase2) Charging enables up to 100% solar energy
Load management
- dynamic charging performance therefore no risk of power failure
Quick and easy
- quick installation in 3 steps easy replacement (wireless)
Flexible access control
- Bluetooth identification via the APP and RFID cards
Specifications
Inputs and outputs: | |
Charging power (adjustable): | 1.4 kW3) up to 22 kW |
Voltage: | 400 V (3-phase) ±20% |
Charging current (adjustable): | 6-32 A (3 or 1 phase) |
Charging socket: | Type 2 jack |
Communication: | |
Control: | Modbus TCP |
Network: | WiFi/Ethernet |
Authentication: | RFID (ISO-14443-A), Bluetooth, App |
Operating modes: | manual charging, scheduled charging, excess PV charging (requires compatible inverters with SmartDongle and Smart Power Sensor) |
Security: | |
Charging cable lock (anti-theft device): | permanently via the app |
Residual Current Device (RCD): | Type A + DC 6 mA integrated (IEC 62955 & IEC 61008-1) |
Accessories: | |
Included: | 2 pieces of RFID cards |
General Data: | |
Dimensions (H x W x D) : | 335 mm x 180 mm x 145 mm |
Weight: | 2.9 kg |
1) Available in solar excess mode.
2) Applies only to the 3-phase Smart Charger (Technical specifications: SCharger-22KT-S0).
3) 1.4 kW for 1-single phase and 4.3 kW for three-phase.
For more details, please refer to the data sheet.
Huawei Technologies Co., Ltd.
Huawei Base, Bantian, Longgang District,
Shenzhen
China
www.huawei.com
Economic actor:Huawei Technologies Deutschland GmbH
Hansaallee 205
40549 Düsseldorf
Deutschland
www.huawei.com/de
1. Installation by Qualified Personnel: The installation of EV charging stations must only be carried out by qualified electricians or authorized professionals.2. Ensure Power Disconnection: Before installation, the circuit must be switched off and checked for power disconnection.
3. Grounding and Surge Protection: Ensure that the system is properly grounded and that suitable surge protection is installed.
4. Observe Cable Cross-Section: Use the cables recommended by the manufacturer and consider the required cable cross-sections for maximum charging power.
5. Hazard from High Voltages: Wall boxes operate with high electrical voltages. Avoid contact with open connections or exposed cables.
6. Residual Current Circuit Breaker (RCD): The wall box must be connected to a suitable residual current circuit breaker (RCD) to ensure protection against residual currents.
7. Ensure Water Tightness: Use appropriate protective caps and seals to prevent water ingress into electrical connections.
8. Follow Instructions: Follow the manufacturer's operating instructions for the wall box.
9. Charge Only Compatible Vehicles: Use the wall box only with vehicles compatible with the charging power and connector type.
10. Use Charging Cable Safely: Ensure that the charging cable is not damaged and is not bent or pinched during the charging process.
11. Handling Moisture: Do not charge vehicles during heavy rain or when the wall box is visibly wet (unless the wall box is explicitly approved for operation in wet conditions).
12. Keep Children Away: Keep children and unauthorized persons away from the wall box to avoid accidental damage or hazards.
13. Use Original Accessories: Only use accessories recommended by the manufacturer, such as charging cables or adapters.