| Quantity | Unit price |
|---|---|
| To 9 |
€133.43
|
| To 19 |
€122.75
|
| To 34 |
€117.42
|
| From 35 |
€112.08
|
- Delivery time:
Currently out of stock, delivery time: 105-107 working days
- Item-No.: 114815
- Manufacturer-No.: LD17060
- Product-Weight: 25.5 kg
- Shipping info: Spedition
Luxor Eco Line Prime 500 Wp HJT Back Contact Double Glass Bifacial Solar Panel LD17060
The Luxor Eco Line Prime is a high-quality bifacial double glass solar panel (glass-glass) based on the combination of N-Type HJT technology and back contact architecture (BC). With 500 watts peak output and a module efficiency of up to 25.06 % – crossing the 25 % threshold for the first time – the Eco Line Prime sets a new benchmark in the premium segment. With a bifaciality factor of up to 88 %, the panel additionally captures reflected light on the rear side for measurably higher overall energy yields.
The panel is built with a robust glass-glass construction – with 2.0 mm front and rear panes of semi-tempered glass. Thanks to the back contact architecture, no busbars or conductive lines are visible on the front surface – the entire cell area is available for uninterrupted light absorption. The optimised temperature coefficient of just −0.24 %/°C ensures the panel maintains its output even at high summer temperatures.
The Eco Line Prime is Luxor Solar's absolute flagship model – awarded the EUPD Top Brand PV Germany 2026. As a German warrantor, Luxor Solar backs the warranty directly under German law – with a 30-year product warranty, a 30-year linear performance warranty and a guaranteed output of at least 89 % after 30 years. Mechanically, the panel withstands snow loads of up to 6,000 Pa and wind loads of up to 4,000 Pa, and is certified to Hail Resistance Class 4 (HW 4 / IEC 61215) – tested up to 45 mm hailstone diameter at 110.5 km/h.
What is HJT Technology?
HJT stands for Heterojunction Technology – a solar cell technology that combines two different silicon types in a single cell. The core of the cell consists of a crystalline N-Type silicon wafer – the carrier of the actual photovoltaic effect. Ultra-thin layers of amorphous silicon are applied to both sides of this wafer. These amorphous layers passivate the surface of the crystalline wafer with exceptional effectiveness – minimising recombination losses and enabling open-circuit voltages exceeding 750 mV.
The result is a cell with unique properties: an extremely low temperature coefficient of −0.24 %/°C – significantly better than TOPCon or PERC – and a symmetrical cell structure that makes the panel inherently bifacial. Combined with back contact architecture – which relocates all contacts to the rear of the cell – the Eco Line Prime achieves efficiencies exceeding 25 %, setting a new benchmark for commercial solar panels.
What is Bifaciality & BNPI?
A bifacial solar panel generates electricity not only on the front side but also on the rear side – by capturing reflected light from the surrounding surface and converting it into additional energy. The stated rated output of 500 Wp refers exclusively to the front side under standard test conditions (STC) – the rear side delivers additional yield on top, depending on the installation situation. The bifaciality factor of up to 88 % – one of the highest values on the market – indicates how efficiently the rear side performs relative to the front side.
To better reflect real-world yield, the BNPI value (Bifacial Nominal Power at Irradiance) is used. The panel is measured under defined conditions: 1,000 W/m² on the front side and an additional 135 W/m² on the rear side at 25 °C. For the Eco Line Prime 500 Wp, the BNPI value reaches up to 554.00 Wp – exact values can be found in the datasheet.
Features:
- 500 Wp output & up to 25.06 % efficiency – N-Type HJT Back Contact technology above the 25 % threshold
- Bifacial double glass (glass-glass) – up to 88 % bifaciality for additional yield from the rear side
- No visible busbars – back contact architecture for maximum light absorption
- Hail Resistance Class 4 (HW 4) – certified up to 45 mm hailstone diameter / 110.5 km/h
- 30-year product & performance warranty – under German law, min. 89 % output after 30 years
| Technical Data | |
| Module Type / Cell Technology: | Glass-Glass Bifacial / N-Type HJT Back Contact |
| Rated Power (STC): | 500 Wp |
| Module Efficiency: | 25.06 % |
| Open-Circuit Voltage (VOC): | 41.52 V |
| Short-Circuit Current (ISC): | 15.43 A |
| Bifaciality Factor: | up to 88 % |
| Glass Front / Rear: | 2.0 mm solar glass with anti-reflective coating / 2.0 mm semi-tempered glass, White Mesh |
| Frame: | Stable anodised aluminium profile |
| Dimensions: | 1800 × 1134 × 30 mm |
| Weight: | 25.5 kg |
| Connector Type: | MC4-Evo2 |
| Maximum System Voltage: | 1,500 V DC |
| Operating Temperature: | −40 to +85 °C |
| Temperature Coefficient (PMAX): | −0.24 %/°C |
| Maximum Series Fuse Rating: | 25 A |
| Hail Resistance Class: | HW 4 (IEC 61215) – ∅ 45 mm / 110.5 km/h |
| Fire Rating: | C (IEC 61730) / B2 (DIN 4102-1) / E (EN 13501-1) |
| Mechanical Load: | 6,000 Pa (snow load) / 4,000 Pa (wind load) |
| Warranty: | 30-year product warranty / 30-year performance warranty |
Further technical details can be found in the datasheet.

10 a.m. - 12 p.m. and
2 p.m. - 4 p.m.
- Photovoltaic experts since 2008
- Only original products from top brands
- Short response times to inquiries
- 2% discount for prepayment
- Short delivery times
- Collection of in-stock items possible
Login
Safety Instructions:
1. Installation by Professionals: Installation should only be carried out by qualified and authorized professionals.2. Use of Protective Equipment: When handling PV modules, wear appropriate protective equipment such as gloves and safety goggles.
3. Secure Work Area: Do not work in adverse weather conditions, particularly rain, snow, or strong winds.
4. Use Covering: Cover the modules during installation to minimize power generation.
5. Fastening and Load Capacity: Ensure that the substructure can safely support loads from wind, snow, and other environmental factors.
6. Contact Protection: Do not touch exposed electrical contacts or cable ends.
7. No Handling with Wet Hands: Never work with electrical connections or components if your hands are wet.
8. Use Appropriate Tools: Use insulated tools and measure the voltage of the modules before making connections.
9. Grounding: Ensure that the system is properly grounded to avoid electric shocks or overvoltage damage.
10. No System Modifications: Do not modify the system without consulting a professional or the manufacturer.