Skip to main content Skip to search Skip to main navigation

Luxor Eco Line Pro 470 Wp TOPCon Double Glass Full Black Solar Panel LD17051

Luxor Eco Line Pro 470 Wp TOPCon Double Glass Full Black Solar Panel LD17051

The Luxor Eco Line Pro is a high-quality Full Black double glass solar panel (glass-glass) based on the modern N-Type TOPCon technology. With 470 watts peak output and a module efficiency of up to 23.85 %, the Eco Line Pro is one of the most powerful Full Black panels in its segment. The fully black design – black cells, black frame, black front surface – blends aesthetically and unobtrusively into any roof.

The panel is built with a robust glass-glass construction – with 2.0 mm front and rear panes of semi-tempered glass. This protects the panel significantly better against moisture, UV radiation and mechanical stress – resulting in a considerably longer service life than conventional glass-foil panels. As a PID-free and LID-free module, performance remains stable throughout the entire service life.

The Eco Line Pro is Luxor Solar's robust all-round solution for maximum longevity and reliability – awarded the EUPD Top Brand PV Germany 2026. As a German warrantor, Luxor Solar backs the warranty directly under German law – with a 30-year product warranty, a 30-year linear performance warranty and a guaranteed output of at least 89 % after 30 years. Mechanically, the panel withstands snow loads of up to 6,000 Pa and wind loads of up to 4,000 Pa, and is certified to Hail Class 4 – tested up to 45 mm hailstone diameter at 110.5 km/h.

What is N-Type TOPCon Technology?

Solar panels are based on silicon wafers – and the wafer type fundamentally determines the cell's properties. P-Type cells (positively doped with boron) were the industry standard for decades – cost-effective to produce, but more susceptible to degradation effects such as PID and LID. N-Type cells (negatively doped with phosphorus) are inherently purer – fewer impurities in the silicon mean fewer recombination losses, more stable performance over the entire service life and significantly lower susceptibility to degradation.

TOPCon (Tunnel Oxide Passivated Contact) is a specialised passivation technology that works exclusively on N-Type wafers. An ultra-thin tunnel oxide layer – typically just 1–2 nanometres thick – is applied to the rear of the cell. This layer acts as a selective filter: it allows electrons to pass through while blocking the recombination of charge carriers at the cell surface. The result: less energy loss within the cell, a higher open-circuit voltage and better efficiency than conventional PERC cells. N-Type provides the stable foundation – TOPCon extracts the maximum from it.

Features:

  • 470 Wp output & up to 23.85 % efficiency – latest N-Type TOPCon technology
  • Full Black double glass (glass-glass) – aesthetic, unobtrusive and more durable than conventional panels
  • PID-free & LID-free – stable performance thanks to N-Type cell technology
  • Hail Class 4 – certified up to 45 mm hailstone diameter / 110.5 km/h
  • 30-year product & performance warranty – under German law, min. 89 % output after 30 years

Technical Data
Module Type / Cell Technology:Glass-Glass (Double Glass) Full Black / Monocrystalline N-Type TOPCon
Rated Power (STC):470 Wp
Module Efficiency:23.85 %
Open-Circuit Voltage (VOC):36.39 V
Short-Circuit Current (ISC):16.54 A
Glass Front / Rear:2.0 mm solar glass with anti-reflective coating, black / 2.0 mm semi-tempered glass, white
Frame:Stable anodised aluminium profile, black
Dimensions:1762 × 1134 × 30 mm
Weight:24.5 kg
Connector Type:MC4 or equivalent (IP67)
Maximum System Voltage:1,000 V / 1,500 V DC
Operating Temperature:−40 to +85 °C
Temperature Coefficient (PMAX):−0.29 %/°C
Maximum Series Fuse Rating:30 A
Hail Class:Class 4 (∅ 45 mm / 110.5 km/h)
Fire Rating:IEC Class C
Mechanical Load:6,000 Pa (snow load) / 4,000 Pa (wind load)
Warranty:30-year product warranty / 30-year performance warranty

Further technical details can be found in the datasheet.

Ask us any question
support agent
Phone: +49 561 / 220 706 0
Monday - Friday:
10 a.m. - 12 p.m. and
2 p.m. - 4 p.m.
Shop with confidence
  • Photovoltaic experts since 2008
  • Only original products from top brands
  • Short response times to inquiries
  • 2% discount for prepayment
  • Short delivery times
  • Collection of in-stock items possible
Confidence built in

Average rating of 4.9 out of 5 stars

4,9 of 5 Stars
Manufacturer "Luxor Solar"
Luxor Solar is an owner-managed medium-sized company founded in 2007 and headquartered in Stuttgart. The experienced module manufacturer attaches particular importance to the durability and reliability of its products. This is ensured by strict standards with 100% optical and technical quality control at cell input and module output. This guarantees safety-oriented system operators outstanding performance over the entire operating life of their photovoltaic system. The high quality standards of German engineers in development and production are confirmed by the very low complaint rate of < 0.003%. Down-to-earth business practices and innovative products are the basis for Luxor Solar''s long-term corporate success.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


datenblatt luxor eco line pro fullblack 450 470 wp ld17051

Safety Instructions:

1. Installation by Professionals: Installation should only be carried out by qualified and authorized professionals.
2. Use of Protective Equipment: When handling PV modules, wear appropriate protective equipment such as gloves and safety goggles.
3. Secure Work Area: Do not work in adverse weather conditions, particularly rain, snow, or strong winds.
4. Use Covering: Cover the modules during installation to minimize power generation.
5. Fastening and Load Capacity: Ensure that the substructure can safely support loads from wind, snow, and other environmental factors.
6. Contact Protection: Do not touch exposed electrical contacts or cable ends.
7. No Handling with Wet Hands: Never work with electrical connections or components if your hands are wet.
8. Use Appropriate Tools: Use insulated tools and measure the voltage of the modules before making connections.
9. Grounding: Ensure that the system is properly grounded to avoid electric shocks or overvoltage damage.
10. No System Modifications: Do not modify the system without consulting a professional or the manufacturer.
Skip product gallery

More Products from Luxor Solar to look at

Contact
us