SMA RFID Card for EV Charger

Manufacturer:

SMA Solar Technology AG
Sonnenallee 1
34266 Niestetal
Deutschland

info@SMA.de
www.sma.de

Economic actor:

SMA Solar Technology AG
Sonnenallee 1
34266 Niestetal
Deutschland

info@SMA.de
www.sma.de

1. Installation by Qualified Personnel: The installation of EV charging stations must only be carried out by qualified electricians or authorized professionals.
2. Ensure Power Disconnection: Before installation, the circuit must be switched off and checked for power disconnection.
3. Grounding and Surge Protection: Ensure that the system is properly grounded and that suitable surge protection is installed.
4. Observe Cable Cross-Section: Use the cables recommended by the manufacturer and consider the required cable cross-sections for maximum charging power.
5. Hazard from High Voltages: Wall boxes operate with high electrical voltages. Avoid contact with open connections or exposed cables.
6. Residual Current Circuit Breaker (RCD): The wall box must be connected to a suitable residual current circuit breaker (RCD) to ensure protection against residual currents.
7. Ensure Water Tightness: Use appropriate protective caps and seals to prevent water ingress into electrical connections.
8. Follow Instructions: Follow the manufacturer's operating instructions for the wall box.
9. Charge Only Compatible Vehicles: Use the wall box only with vehicles compatible with the charging power and connector type.
10. Use Charging Cable Safely: Ensure that the charging cable is not damaged and is not bent or pinched during the charging process.
11. Handling Moisture: Do not charge vehicles during heavy rain or when the wall box is visibly wet (unless the wall box is explicitly approved for operation in wet conditions).
12. Keep Children Away: Keep children and unauthorized persons away from the wall box to avoid accidental damage or hazards.
13. Use Original Accessories: Only use accessories recommended by the manufacturer, such as charging cables or adapters.