Inquiry PV Battery Systems
Inquiry Solar System

SolarEdge Energy Meter SE-MTR-3Y-400V-A with 100 A converter

€319.50

Prices incl. VAT plus shipping costs

    in stock (1-3 days) (abroad may vary)

  • 112843
  • 1.155 kg
  • SE-MTR-3Y-400V-A 100A
SolarEdge Energy Meter SE-MTR-3Y-400V-A with 100 A converter with Modbus connection for... more

SolarEdge Energy Meter SE-MTR-3Y-400V-A with 100 A converter

with Modbus connection for SolarEdge systems

Expansion of existing system PV to StorEdge

Advantages in the environment:


  • High accuracy of meter readings for production/consumption monitoring
  • Read out feed and reference for feed limitation
  • Small size and easy installation - suitable for standard distributors
  • Suitable for systems on residential houses, commercial buildings or large PV systems
  • Integrated bus terminating resistor (can be activated / deactivated via DIP switch 7)

Technical data SE-MTR-3Y-400V-A
225 g
ELECTRICAL DATA
operating voltage range - outer conductor to neutral / outer conductor to outer conductor:Nominal: 230/400 Vac
184-264.5 / 320-460 Vac
AC frequency:45/65 Hz
Supported networks - single-phase; three-phase (3):L / N / PE ; L1 / L 2 / L3 / N / PE
power consumption (typ.):3 W
current converter inputs CCT Inputs:333 mV
 
COMMUNICATIONS
Supported communication interfaces:RS485 half-duplex, 3 cables (A, B, GND)
Reaction time:≤200ms(4)
Preset device ID (Modbus): 2
terminating resistor for RS485:120 Ω
 
ACURACY (AT 25 °C, POWER FACTOR: 1)
1 % - 100 % of the current transformer rated current:±1.0 %
 
ERFÜLLTE STANDARDS
operating temperature range safety:IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04,
Resistance: 2000, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
EMV:EN 55022 Class B
 
MECHANICAL SPECIFICATIONS
Dimensions:75 x 138.6 x 35 mm
Weight:
Type of use:
operating temperature range:-40 to +85 °C
Relative humidity (non-condensing):310 g
Mounting type:DIN rail / wall mounting
 
current converter
model(4):SE-ACT-0750-100
rated current (RMS):100 A
dimensions (inner / outer):20 x 20 mm / 61 x 60.4 mm

(3) PE connection (protective earth) is not required for meter operation
(4) If the meter is connected to the grid connection point and if RS485 is used for several inverters

For further details please refer to the data sheet.
Related links to "SolarEdge Energy Meter SE-MTR-3Y-400V-A with 100 A converter"
Viewed