Wattstone 15° Basic Set PV Flat Roof Mounting System – 2 Solar Panels South – 2x for East-West
| Quantity | Unit price |
|---|---|
| To 1 |
€170.78
|
| From 2 |
€162.24
|
- Delivery time:
In stock, delivery time: 5-7 working days (varies for international orders)
- Item-No.: 114550
- Product-Weight: 79 kg
- Shipping info: Spedition
Wattstone 15° Basic Set PV Flat Roof Mounting System – 2 Solar Panels South – 2x for East-West
Starter set consisting of Wattstone 15° fine concrete base and module clamps for roof-friendly PV mounting of 2 solar panels on flat roofs – no roof penetration required.
The Wattstone 15° Basic Set for 2 solar panels is the ideal solution for flat roof PV mounting with a steeper tilt angle – ideal for balcony power stations and plug-in solar devices on flat roofs, terraces or in the garden, as well as for larger residential and commercial installations. Simply combine 2 of this basic set to create a complete east-west configuration for 4 solar panels. The set contains only the essentials – concrete base and clamps. All additional accessories can be selected optionally as needed and ordered from our shop. The exact items can easily be determined using the Set Configurator. For project-specific wind load calculations, Wattstone's free Wind Load Calculator is available.
Scope of Delivery
- 3× Wattstone 15° Fine Concrete Base
- 4× End Module Clamp for Wattstone Fine Concrete Base
- 2× Mid Module Clamp for Wattstone Fine Concrete Base
Optional Accessories
Depending on the surface, we recommend either the standard protective mat (for bitumen or wood surfaces) or the aluminium-laminated protective mat (for PVC, membrane or EPDM surfaces) – no protective layer is required on concrete, gravel or grass. 2 protective mats per Wattstone concrete base are required in each case. For south-facing installations, we additionally recommend a wind deflector for protection against wind loads, easily mounted using the Wattstone Accessory Mounting Set. For east-west installations, we recommend the East-West Connector Set for a more stable connection between the bases. The Easy-Lift Installation Aid is available for easier transport on site – and the Cable Clips allow for neat and tidy cable management.
| Technical Specifications | |
| Suitable for: | 2 Solar Panels South-Facing Installation |
| Expandable: | 2× Basic Set = East-West Setup for 4 Solar Panels |
| Tilt Angle: | 15° |
| Compatible Module Frames: | 30 mm or 35 mm |
| Tightening Torque: | 14–16 Nm (no impact wrench) |
| Ballasting: | No Roof Penetration Required |
Further technical details can be found in the data sheet.
10 a.m. - 12 p.m. and
2 p.m. - 4 p.m.
- Photovoltaic experts since 2008
- Only original products from top brands
- Short response times to inquiries
- 2% discount for prepayment
- Short delivery times
- Collection of in-stock items possible
Wattstone GmbH is a German manufacturer of photovoltaic mounting systems, specializing in the development and supply of substructures for solar installations. The company offers flexible and easy-to-install solutions for PV systems on flat roofs, open spaces, gardens, fences, and more. Particularly well-known are their innovative L-blocks, which allow for the secure mounting of PV modules on flat roofs and level surfaces without penetrating the roof membrane. With a clear focus on simplicity, sustainability, and customer orientation, Wattstone is shaping the future of the solar industry to be more efficient and environmentally friendly.
Manufacturer
Wattstone GmbH
Grenzstraße 182
46562 Voerde
Germany
Tel. / Fon:
+49 (0) 2855 9389206
E-Mail: office@wattstone.de
Web: www.wattstone.de
Economic operator
Wattstone GmbH
Grenzstraße 182
46562 Voerde
Germany
Tel. / Fon:
+49 (0) 2855 9389206
E-Mail: office@wattstone.de
Web: www.wattstone.de
Safety Instructions:
1. Installation by Professionals: The installation should only be carried out by qualified and authorized professionals.2. Wear Protective Equipment: When handling PV modules, use appropriate protective equipment such as gloves and safety glasses.
3. Components must operate within the technical specifications listed in their data sheets.
4. Use only manufacturer-approved accessories.
5. Do not install components if they are physically damaged or equipped with damaged or substandard cables or connectors.
6. No Work Under Voltage: Perform installation or maintenance work only when the system is de-energized.
7. Do not apply an external voltage source to a module or a string with components.
8. Protection from External Influences: Install protective conduits and cables in a way that shields them from UV radiation, rodents, and mechanical damage.
9. Protection from Moisture and Dirt: Store and install accessories in dry and clean locations to prevent damage from moisture or contamination.
10. Regular Inspection: Inspections and maintenance should be carried out regularly to detect potential damage or signs of aging at an early stage.
