- Delivery time:
- Order number: 113047
- Weight: 0.5 kg
- EAN: 9007947412614
- Manufacturer's no.: 4,240,313,CK
- Collection possible: Baunatal
in stock (2-5 working days) (abroad may vary)
Fronius Overvoltage Protection GEN24 Type 1+2 - 4,240,313,CK
For Fronius Symo GEN24 Plus and Fronius Primo GEN24 Plus
The surge protection type 1+2 for direct and indirect lightning strikes, is suitable for use with Fronius Symo GEN24 Plus inverters as well as Fronius Primo GEN24 Plus (all power classes) and thus fulfills the standard requirement for installation of a DC surge protection close to the inverter.
The surge protection is equally applicable to all devices, regardless of whether 1 or 2 trackers are used. When operating with only one tracker, one input on the surge protector remains unused.
Thanks to the adjustable, integrated remote signaling, the system operator receives an automatic message via the Fronius Solar.web online portal when the overvoltage protection is triggered.
The surge protection is supplied as a retrofit kit and can be installed in the connection area of the inverter in just a few minutes.
TECHNICAL DATA
Article name | DC SPD type 1+2 GEN24 |
Nominal voltage | 1000 VDC |
Fault indication | Mechanical, Red |
Remote signaling | Integrated |
Standards | IEC 61643-31 / DIN EN 50539-11; UL1449 ed.4 / VDE 0185-305-3 Bbl. 5 |
Manufacturer Part No. | 4,240,313,CK |
For more info, please refer to the data sheet.
Fronius International GmbH
Froniusstraße 1
4643 Pettenbach
Österreich
contact@fronius.com
www.fronius.com
Fronius Deutschland GmbH
Fronius Straße 1
36119 Neuhof-Dorfborn
Deutschland
pv-sales-germany@fronius.com
www.fronius.com/de-de
Safety Instructions:
1. Installation by Professionals: The installation should only be carried out by qualified and authorized professionals.2. Wear Protective Equipment: When handling PV modules, use appropriate protective equipment such as gloves and safety glasses.
3. Components must operate within the technical specifications listed in their data sheets.
4. Use only manufacturer-approved accessories.
5. Do not install components if they are physically damaged or equipped with damaged or substandard cables or connectors.
6. No Work Under Voltage: Perform installation or maintenance work only when the system is de-energized.
7. Do not apply an external voltage source to a module or a string with components.
8. Protection from External Influences: Install protective conduits and cables in a way that shields them from UV radiation, rodents, and mechanical damage.
9. Protection from Moisture and Dirt: Store and install accessories in dry and clean locations to prevent damage from moisture or contamination.
10. Regular Inspection: Inspections and maintenance should be carried out regularly to detect potential damage or signs of aging at an early stage.