SolarEdge Energy Meter SE-MTR-3Y-400V-A with 100 A converter

Left over

SolarEdge Energiezähler SE-MTR-3Y-400V-A mit 3x 100 A Wandler

Discount - 33%

€187.41

was €278.46¹

plus shipping costs

Delivery time:

in stock (2-5 working days) (abroad may vary)

Order number: 112843
Weight: 0.525 kg
EAN: 4262431421823
Manufacturer's no.: SE-MTR-3Y-400V-A 100A
Collection possible: Baunatal

SolarEdge Energy Meter SE-MTR-3Y-400V-A with 3x 100A converter with Modbus connection for... more

Close menu

SolarEdge Energy Meter SE-MTR-3Y-400V-A with 3x 100A converter

with Modbus connection for SolarEdge systems

Expansion of existing system PV to StorEdge

Advantages in the environment:

High accuracy of meter readings for production/consumption monitoring
Read out feed and reference for feed limitation
Small size and easy installation - suitable for standard distributors
Suitable for systems on residential houses, commercial buildings or large PV systems
Integrated bus terminating resistor (can be activated / deactivated via DIP switch 7)

Technical data SE-MTR-3Y-400V-A

ELECTRICAL DATA
operating voltage range - outer conductor to neutral / outer conductor to outer conductor:	Nominal: 230/400 Vac 184-264.5 / 320-460 Vac
AC frequency:	45/65 Hz
Supported networks - single-phase; three-phase ⁽³⁾:	L / N / PE ; L1 / L 2 / L3 / N / PE
power consumption (typ.):	3 W
current converter inputs CCT Inputs:	333 mV

COMMUNICATIONS
Supported communication interfaces:	RS485 half-duplex, 3 cables (A, B, GND)
Reaction time:	≤200ms⁽⁴⁾
Preset device ID (Modbus):	2
terminating resistor for RS485:	120 Ω

ACURACY (AT 25 °C, POWER FACTOR: 1)
1 % - 100 % of the current transformer rated current:	±1.0 %

ERFÜLLTE STANDARDS
operating temperature range safety:	IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04,
Resistance: 2000, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
EMV:	EN 55022 Class B

MECHANICAL SPECIFICATIONS
Dimensions:	75 x 138.6 x 35 mm
Weight:	225 g
Type of use:
operating temperature range:	-40 to +85 °C
Relative humidity (non-condensing):	310 g
Mounting type:	DIN rail / wall mounting

current converter
model⁽⁴⁾:	SECT-SPL-100A-A
Quantity:	3
rated current (RMS):	100 A
dimensions (inner / outer):	9 x 9 mm / 30.5 x 23.2 x 42.4 mm

⁽³⁾ PE connection (protective earth) is not required for meter operation
⁽⁴⁾ If the meter is connected to the grid connection point and if RS485 is used for several inverters

For further details please refer to the data sheet.

Related links to "SolarEdge Energy Meter SE-MTR-3Y-400V-A with 3x 100 A converter"

Produktsicherheits-Informationen anzeigen... more

Close menu

Manufacturer:

SolarEdge Technologies Ltd.
1st Hamada Street,
Herzliya, 4673335,
Israel

www.solaredge.com

Economic actor:

SolarEdge Technologies GmbH
Werner-Eckert-Str.6
81829 München
Deutschland

+49 89-454597-0
www.solaredge.com/de

Safety Instructions:

1. Installation by Qualified Personnel: The installation of smart meters must only be carried out by qualified electricians or authorized professionals.
2. Power Circuit Disconnection: Before installation, the power circuit into which the smart meter will be integrated must be completely disconnected and checked for powerlessness.
3. Ensure Proper Grounding: Verify the proper grounding of the system before connecting the smart meter.
4. Select Installation Location: Install the device only in a safe, well-ventilated, and dry indoor area that meets the manufacturer's installation requirements.
5. Correct Cable Connection: Use only manufacturer-recommended cables and connections, ensuring correct polarity and secure contacts.
6. Danger from High Voltages: Smart meters are integrated into power circuits that may be live. Avoid any contact with open connections or wires.
7. Use Proper Circuit Protection: Connect the smart meter only to power circuits with appropriate protective switches (e.g., residual current devices (RCDs) or circuit breakers).
8. Check Insulation: Inspect cable insulation and connection status before commissioning to avoid short circuits.
9. No Modifications: Do not alter or modify the smart meter or its wiring.
10. Avoid Overloading: Do not exceed the manufacturer's specified maximum current load for the smart meter.
11. No Unauthorized Modifications: Unauthorized alterations, modifications, repairs, or opening of the product are strictly prohibited.

Folgende Infos zum Hersteller sind verfübar...... more

Close menu

SolarEdge Technologies Inc.

SolarEdge is a leading global provider of innovative solar energy solutions. Since its founding in 2006, the company has installed its systems and products in over 140 countries. With an impressive total shipped capacity of over 40 GW and a team of more than 5,200 employees worldwide, SolarEdge designs, manufactures and delivers groundbreaking solar and hybrid inverters, power optimizers, mobile charging stations for electric cars and energy storage solutions. SolarEdge also monitors more than 3.3 million systems worldwide and continues to focus on advancing its technology and innovation to drive renewable energy and a sustainable future.