- Delivery time:
- Order number: 113725
- Weight: 0.19 kg
- EAN: 9007947520418
- Manufacturer's no.: 41,0010,0104
- Collection possible: Baunatal
in stock (2-5 working days) (abroad may vary)
Fronius SMART METER CT V 100A/333mV
The solution for larger PV systems
The Fronius Smart Meter CT current transformer can be conveniently connected to enable higher currents to be measured without having to disconnect the power cable when connecting. This is made possible by split-core technology, in which the current transformer is placed around the line to be measured without the cable having to be disconnected for installation.The current transformer ensures that the measured current is converted into a signal that can be measured by the Fronius Smart Meter. The Smart Meter then uses the conversion ratio to convert the signal to the original primary current. The result: reliable measurement of key data for optimization, even for larger PV systems.
Note: The Fronius Smart Meter CT V 100A/333mV is compatible with the Fronius Smart Meter WR 100-600 V-3 and Fronius Smart Meter IP.
Technical data CT V 100A/333mV | |
Compatible Smart Meter: | Fronius Smart Meter WR 100-600 V-3 Fronius Smart Meter IP |
Type of installation: | Klappwandler |
Dimensions (HxWxD): | 46 x 31,5 x 31,5 mm |
Diameter: | 16mm |
Cable length: | 1m |
Temperature range: | -40 bis +65 °C |
For further details, please refer to the data sheet.
Fronius International GmbH
Froniusstraße 1
4643 Pettenbach
Österreich
contact@fronius.com
www.fronius.com
Fronius Deutschland GmbH
Fronius Straße 1
36119 Neuhof-Dorfborn
Deutschland
pv-sales-germany@fronius.com
www.fronius.com/de-de
Safety Instructions:
1. Installation by Qualified Personnel: The installation of smart meters must only be carried out by qualified electricians or authorized professionals.2. Power Circuit Disconnection: Before installation, the power circuit into which the smart meter will be integrated must be completely disconnected and checked for powerlessness.
3. Ensure Proper Grounding: Verify the proper grounding of the system before connecting the smart meter.
4. Select Installation Location: Install the device only in a safe, well-ventilated, and dry indoor area that meets the manufacturer's installation requirements.
5. Correct Cable Connection: Use only manufacturer-recommended cables and connections, ensuring correct polarity and secure contacts.
6. Danger from High Voltages: Smart meters are integrated into power circuits that may be live. Avoid any contact with open connections or wires.
7. Use Proper Circuit Protection: Connect the smart meter only to power circuits with appropriate protective switches (e.g., residual current devices (RCDs) or circuit breakers).
8. Check Insulation: Inspect cable insulation and connection status before commissioning to avoid short circuits.
9. No Modifications: Do not alter or modify the smart meter or its wiring.
10. Avoid Overloading: Do not exceed the manufacturer's specified maximum current load for the smart meter.
11. No Unauthorized Modifications: Unauthorized alterations, modifications, repairs, or opening of the product are strictly prohibited.